Home / Products / 27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U
27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U
Basic PDU

27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U

Quick Answer27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U — an IDCPDU Basic PDU for data-centre and equipment-room racks.
  1. Power read where it is consumed — Current, voltage, power and energy at the strip, shown on the local display and readable remotely — you spot a rack running out of headroom before the breaker trips.
  2. Local socket pattern, not an adapter job — Outlets are the pattern already installed in the building, so equipment cords go straight in — one joint less to loosen inside a live rack.
  3. 0U vertical — no rack units consumed — The strip hangs on the rear post, so every U stays available for servers.
  4. ⁦110–250⁩ V wide input — One build covers 120 V and 230 V sites and rides out a brownout instead of dropping the load.
  5. Breaker ahead of the outlets — A fault trips inside the strip, not at the upstream panel — the rest of the row keeps serving traffic.

Tel: +86-574-63783045 · ricky@idcpdu.com

Contact Us
SHARE:

Product Description

  • 12× IEC C13 plus 15× German Schuko outlets
  • Schuko group at ⁦220–250⁩ V, C13 group at ⁦110–250⁩ V
  • Hot-swap current and voltage meter, hydraulic breaker
  • German and Central European racks often mix IEC servers with Schuko-fed network gear and lab equipment; this strip serves both from one 63 A feed on a 1358 mm body.
  • The meter sits in a hot-swap module: it can be replaced without dropping the load, which avoids a rack shutdown if the display fails.
  • Used in German, Austrian, Swiss and Polish IT rooms, university labs and industrial control cabinets.
  • Outlet ratio and cable length are built to drawing: layout within 30 minutes, quotation within 1 hour.

Frequently Asked Questions

What is the body dimensions (W×H) of 27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U?

60 × 85 mm

What is the max input current of 27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U?

63 A

What is the input voltage of 27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U?

C13: ⁦⁦110–250⁩⁩ V AC; Schuko: ⁦⁦220–250⁩⁩ V AC, 50/60 Hz

What input connection does the 27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U use?

OT terminal junction box

What is the certification of 27-Outlet 12×C13 + 15×Schuko Vertical Rack PDU, Hot-Swap Meter, 63 A, 0U?

CE / EMC; built under ISO 9001

Related Products

← Back to Products