Home / Products / 24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485
24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485
Metered PDU

24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485

Quick Answer24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485 — an IDCPDU Metered PDU for metered racks in data centres.
  1. Power read where it is consumed — Current, voltage, power and energy at the strip, shown on the local display and readable remotely — you spot a rack running out of headroom before the breaker trips.
  2. Surge clamped before the power supplies — Lightning and switching surges are discharged at the strip; the status lamp shows when the cartridge is spent instead of failing silently.
  3. Three-phase feed, load spread over L1/L2/L3 — The rack is not hung on one leg, and the 23 kW envelope matches GPU, blade and miner density.
  4. 24 outlets on one strip — A single strip feeds a whole rack, so adding a node no longer means a second PDU and a second feed cable.
  5. 0U vertical — no rack units consumed — The strip hangs on the rear post, so every U stays available for servers.
  6. Lockable IEC sockets — C13 and C19 cords click in and stay in — vibration, cleaning and a stray knee no longer turn into an unexplained reboot.
  7. C13 and C19 side by side — Servers, switches and storage hang off one strip — no second PDU just because the C19 count did not match the drawing.

Tel: +86-574-63783045 · ricky@idcpdu.com

Contact Us
SHARE:

Product Description

  • Three-phase ⁦380–415⁩ V metered strip with 24 lockable C13/C19 outlets
  • Balanced L1/L2/L3 loading up to 23 kW on a 32 A feed
  • Per-group thresholds, hot-swap meter and RS485 Modbus-RTU
  • A three-phase inlet spreads 24 outlets across L1, L2 and L3, so one strip feeds a full cabinet without pulling a single-phase feed to its limit. Thresholds can be set per outlet group, which makes it practical to watch one branch of eight rather than only the whole strip. Hydraulic magnetic breakers hold their trip point in a warm cabinet, and the meter bay is replaceable while the rack runs.

Frequently Asked Questions

What is the input connection of 24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485?

Hard-wired terminal block, 5-wire

What is the input voltage of 24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485?

⁦⁦380–415⁩⁩ V AC three-phase, 50/60 Hz

What is the max input current of 24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485?

32 A per phase

What is the rated power of 24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485?

Up to 23 kW at 415 V, 32 A

What is the monitoring interface of 24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485?

RS485 Modbus-RTU

What is the certification of 24-Outlet Three-Phase Lockable Metered Rack PDU, 1.5U, Hot-Swap Meter, RS485?

CE / EMC / RoHS; built under ISO 9001

Related Products

← Back to Products